Well, it is never fun to think about pool repairs, but if you ignore the minute issues they can turn into massive headaches that cause headaches and costly repair bills down the road. The sooner you identify the problem, the better off you’ll be.

Here in this article, we put forth the most prevalent swimming pool problems that you must not overlook.

So, read on to know these pool issues:-

#1. Pool Leaks

One of the biggest mistakes a pool owner makes is putting off the pool repair when the leak has been detected. Many think; it’s just a minute leak, nothing to worry about, but actually, it is a cause of great concern. Besides the loss of water & chemicals, depending upon the leak extent, it continuously causes damage to the pool. There are different types of pool leaks, and as follows:-

Wall & Surface Leaks:- If your pool is losing water from surface cracks, then consult a specialist pool expert to evaluate the problem, and offer the best solution. The small cracks on the surface over time erode and widen the crack with time. Further algae and baddies may reside in these cracks.

Visible Plumbing Leaks:- Even if it’s a few drops of pool water leaks, the visible plumbing leaks must not be ignored. The drops can turn into a paddle, and moisture contributes to algae, moss, mold, and more.

Pool Equipment Leaks:- Each piece in the pool filtration system is designed to be air-tight. Any leak would mean the efficiency would decrease, leading to power down the line.

#2. Pool Heater Repairs

Pool owners invest in a pool heater to enjoy warm pool water even during the winters, but what if the pool heater isn’t warming up the water, then it’s time to call a specialist to get it fixed right away.

Some prevalent signs your pool heater is not functioning efficiently:-

• Inconsistent heating
• Malfunctioning thermostat.
• Strange & irritating noises.
• Smoke & burnt smells.
• Sudden shutdown of the pool heater.

What are the causes of pool heater problems?

Pool heaters are designed to be sturdy and last longer with proper care. Some notable factors that contribute to pool heater problems:

• Most of the pool heater parts are metal, therefore corrosion could be a big problem
• Your pool heater depends upon the flow of water, and if the filters are dirty, there would be inadequate heating
• Wear & tear lead to pool heating troubles
• Improper pool chemistry triggers corrosion

#3. Sand Filter

Problematic filters are nothing new. It could be that the pool filter is not filtering the water properly or leaks in the pool filters. Signs that your pool filters must be replaced or repaired:

• Leaks from the Pool Filter Unit Itself: It may be because of the broken o-ring or structural damage to the pool filter unit. If the o-ring is broken, then get it replaced. On the other hand, if there are cracks in the pool filter unit, then repairing is not recommended.
• Multiport Leaks: If the leak is happening from the multiport, then it is highly advisable to reach out to a Newcastle plumbing expert to get it repaired.
• Unusual Pressure From the Pressure Gauge: Through cleaning of the filters can help to bring back the pressure level to normal.

#4. Low or High pH

The safe pH level for the pool water is between 7.2-7.6p pH. A pH above or below can lead to skin, eyes, and throat infection to the people using your pool.

pH level can be evaluated by testing your pool water. To balance the pH level, add pool chemicals. It is imperative to test your pool water at least once in two weeks. Because the last thing you want after a pool party is your guests complaining about the redness and burning of their eyes and skin.

The long-term solution to the pH level problem is to cover your pool when not in use. The pool cover prevents the harmful UV rays of the sun to cause degradation of the pool chemicals. A pool cover with a pool reel mechanism makes it easy-peasy to cover & uncover the pool with a flick of a button.

#5. Green Water

If you wake to see your pool water is having a shade of green, there is probably a growth of pool algae in the pool water. It is most likely you skipped testing the pool water, and the pool’s chlorine levels have dipped, which is needed to prevent algae growth.

Your pool water needs to be shocked to kill the algae and then brush the walls to remove the dead algae. The pool won’t be usable until the complete process is not finished.

Final Piece of Advice

Consider installing a patio cover to enjoy the shade, sipping your favorite mocktail when you watch your kids play in the pool. It not only protects you from scorching sun,  but also your pricey outdoor furniture which may fade with time under the direct influence of the sun. The patio covers can be customized to seamlessly blend with the overall aesthetics of your house exteriors, enhancing curb appeal.